RLS30 Bearing LJ3.3/4 Radial Deep Groove Ball Bearing LS20.1/2

RLS30 Bearing Specification:

RLS30 bearing features imperial-sized dimensions and is classified as a deep groove ball bearing.
Inner Diameter: 92.250mm (3 3/4 inch)
Outer Diameter: 171.450mm (6 3/4 inch)
Width: 28.575mm (1 1/8 inch)
Mass: 2.419kg (5.333lb)
Tolerance Class: P0, P6
Sheilds: open without
Number of Row: single row
Relubrication Feature: without
Radial Internal Play: standard CN or C3
Replacements: RLS 30, RLS-30, LJ3.3/4, LJ 3.3/4, LJ 3 3/4, LS20.1/2, LS 20.1/2, LS 20 1/2

Bearing Maintenance Tips:

1. Regular Inspection:

• Periodically check the bearing for signs of wear, corrosion, or damage.
• Listen for unusual noises during operation, which may indicate issues.

2. Proper Lubrication:

• Ensure the RLS30 bearing is adequately lubricated with the recommended grease or oil.
• Avoid over-lubrication, which can cause excess heat and attract contaminants.
• Re-lubricate at intervals based on operating conditions and manufacturer recommendations.

3. Cleanliness:

• Keep the LJ 3 3/4 bearing and surrounding area clean to prevent dirt, dust, and debris from entering.
• Use clean tools and hands when handling the LS 20 1/2 bearing.

4. Correct Installation:

• Use the proper tools and techniques to install the RLS-30 bearing without applying excessive force.
• Make sure the shaft and housing are clean and free of burrs or damage before installation.

5. Replacement Schedule:

• Replace bearings at the first sign of significant wear or damage to prevent further equipment issues.
• Keep records of maintenance and replacements for future reference.

Inch Series Ball and Roller Bearings – Extensive Variety Provided: