Showing 10–18 of 64 results

SER204-12 Bearing VER212 Insert Ball Bearings ER12

Inner Diameter: 19.05mm/0.77inch Outer Diameter: 47mm/1.8504inch Width: 31mm/1.2188inch Weight: 0.24kg Snap Ring: With Duty: Normal duty Mounting Method: Set screw Seal: Rubber seal on both sides Lubrication: Standard grease lubrication

SER205 Bearing SER 205 Insert Ball Bearing Set Screw Locking 25*52*34.9

Mass: 0.21kg/pc Bore Diameter: 25mm Outside Diameter: 52mm Inner Ring Width: 34.9mm Material: AISI 52100 Steel Radial Dynamic Load Capacity: 1430 kgf Radial Static Load Capacity: 800 kgf

SER206-19 Ball Bearing SER206 Radial Bearings For Housing

Inner (d) Inch: 1.1875 Outer (D) Inch: 2.4409 Width (B) Inch: 1.5000 Bore Type: round Weight: 0.39kg/piece Material: chrome steel Seal: rubber seal on both sides

SER207-23 Bearing SER 207-23 Radial Ball Bearings For Housing 1.7/16″ Bore

Inner (d): 36.51mm Outer (D): 72.00mm Width (B): 42.86mm Inner (d) Inch: 1.4375 Outer (D) Inch: 2.8346 Width (B) Inch: 1.6875 Weight: 0.61kg/piece

SER208-24 Bearing SER 208-24 Insert Ball Bearing 1.5 Inch Bore

ID: 1.5000 in OD: 3.1496 in Width: 1.9375 in Weight: 0.81kg Bore Type: Round Material: 52100 steel Seal: Rubber seals on both sides Precision: Standard precision ABEC1/P0

SNL213 Bearing SKF SNH213 Plummer Block Housings SE213

Inner Diameter: 110mm Outer Diameter: 149mm Width: 275mm Weight: 6.10kg/set Material: Cast iron Cross Reference: SNL213, SNL 213, SNH213, SE213

SUC205 Bearing AISI440 Pillow Block Insert Ball Bearing 25*52*34.1

Size: 25*52*34.1mm Material: AISI440 Precision Rating: ABEC1, P0 Performance: Standard Duty Locking Device: Set Screw Weight: 0.441KG Certificate:ISO9001: 2015

SUC206 Bearing SSUC206 Insert Ball Bearing Stainless Steel 30*62*38.1

Inside Diameter: 30mm Outer Diameter: 62mm Width: 38.1mm Weight: 0.29kg/pc Material: Stainless Steel AISI-440C Precision Rating: P0, ABEC1 Structure: Insert ball bearing

SUC207 Bearing SSUC207 Insert Ball Bearings For Housing 35*72*42.9

Inner Diameter: 35mm Outer Diameter: 72mm Height: 42.9mm Weight: 0.42kg/pc Material: Stainless steel 440 or 304 Sealing: 2 seals with rubberized fling Structure: Radial ball bearing, insert ball bearing Interchange Numbers: SUC207, SUC207D1, SUC207 D1, SSUC207, SSUC207 D1