L44643 Bearing L44643/L44610 Taper Roller Bearing SET14

L44643 Bearing Information:

L44643 bearing is the cone part of L44643/L44610 bearing.
For L44643/L44610 bearing,
Dimensions: 25.400*50.292*14.224mm (d*D*T)
Mass: 0.13kg/set
Cone: L44643
Cup: L44610
Dynamic load: 32 kN
Static load: 34 kN
Material: AISI 52100 steel
Precision: ABEC1, P0
Seal: Open without seal
Working temperature: -40 °C to 120 °C
Also known as: L44643, L44610, L44643/L44610,L44643 / L44610, L44643-L44610, L44643 – L44610, SET14, set14, 4T-L44643/L44610, 4T – L44643/L44610

Taper Roller Bearings We Supply:

Maintenance Tips for Taper Roller Bearings:

1. Regular Inspection
Periodically check set14 bearings for signs of wear, corrosion, or damage. Early detection can prevent costly breakdowns.

2. Proper Lubrication
Use the recommended type and amount of lubricant. Over-lubrication or under-lubrication can both lead to premature bearing failure.

3. Cleanliness is Key
Keep the 4T – L44643/L44610 bearing and surrounding area clean. Contaminants like dust, dirt, and moisture can cause significant damage.

4. Correct Installation
Ensure bearings are installed using the proper tools and techniques. Misalignment or improper fitting can reduce bearing life.

5. Avoid Overloading
Operate within the bearing’s specified load limits. Excessive loads can cause overheating and early failure.

6. Monitor Operating Temperature
Abnormal temperature increases can indicate issues such as insufficient lubrication or excessive load. The L44643/L44610 bearing is designed to operate within a temperature range of -40 °C to 120 °C.

7. Check for Unusual Noises or Vibrations
Listen for any unusual sounds or vibrations during operation, as these can be early signs of problems.