Showing 1–12 of 24 results

Show sidebar
NSK EW208 bearing
Close

NSK EW208 Bearing EW208 AV2S Insert Ball Bearing GE40-XL-KRR-B

Dimensions: 40*80*56.3mm Mass: 0.72kg/pc Material: Gcr15 Seal: Double sealed Structure: Deep groove ball bearing Cross Reference: EW208, EW208 AV2S, GE40-XL-KRR-B, GE40KRRB, 36208 and so on
NSK UCP211D1 bearing
Close

NSK UCP211D1 Bearing UCP211 Pillow Block Bearing Unit

Inner (d): 55mm Outer (D): 219mm Width (B): 54mm Mass: 3.7kg.set Insert bearing: UC211 Bearing housing: P211 Material: Chrome steel + cast iron Interchange: UCP211 D1, UCP211 D1X, UCP211 etc.
SA210-31 bearing
Close

SA210-31 Bearing 1-15/16″ Insert Bearing SA 210-31

SA210-31 Mass: 0.85kg/pc Dimensions: 49.212*90.000*43.700mm Rolling Element: Balls Seal Type: Double shielded Material: Chrome steel, Gcr15 Cross Reference: SA210-31, SA 210-31, FH210-31, KH210-31, RA115RRB, AEL210-115, YET210-115W etc.
SB205 bearing
Close

SB205 Bearing SB205D1 Radial Insert Ball Bearing 25x52x27mm

ID: 25mm OD: 52mm Width: 27mm Mass: 0.18kg/pc Material: Gcr15 steel D1: Lubricate free bearing Cross Reference: SB205, SB205D1, SB205 D1,  SB 205, SB-205 and so on
SER205 bearing
Close

SER205 Bearing SER 205 Insert Ball Bearing Set Screw Locking 25*52*34.9

Mass: 0.21kg/pc Bore Diameter: 25mm Outside Diameter: 52mm Inner Ring Width: 34.9mm Material: AISI 52100 Steel Radial Dynamic Load Capacity: 1430 kgf Radial Static Load Capacity: 800 kgf
SUC205 bearing
Close

SUC205 Bearing AISI440 Pillow Block Insert Ball Bearing 25*52*34.1

Size: 25*52*34.1mm Material: AISI440 Precision Rating: ABEC1, P0 Performance: Standard Duty Locking Device: Set Screw Weight: 0.441KG Certificate:ISO9001: 2015
SUC206 bearing
Close

SUC206 Bearing SSUC206 Insert Ball Bearing Stainless Steel 30*62*38.1

Inside Diameter: 30mm Outer Diameter: 62mm Width: 38.1mm Weight: 0.29kg/pc Material: Stainless Steel AISI-440C Precision Rating: P0, ABEC1 Structure: Insert ball bearing
SUC208 bearing
Close

SUC208 Bearing SSUC208 Stainless Steel Ball Bearing 40*80*49.2

Inner (d) : 40mm Outer (D): 80mm Width (B): 49.2mm Weight: 0.6350kg/pc Structure: Insert ball bearing Material: Stainless Steel AISI-440C Interchange: SUC208, SSUC208,YAR208-2F/HV, etc.
SUCF205-16 bearing
Close

SUCF205-16 Bearing Stainless Steel 1 Inch Pillow Block Bearing SUCF205

Shaft Diameter: 1" inch Bolt Size: 3/8" inch Bearing No: SUC205-16 Housing No: F205 Weight: 0.8kg/set Insert Bearing: Ball Bearing Bearing Material: stainless steel 440
SY 35 TF bearing
Close

SY 35 TF Bearing SY35TF Pillow Block Bearing YAR207-2F

Shaft Diameter: 35mm Insert Bearing: YAR207-2F Bearing Housing: SY507M Seal: Standard seal for Y-bearings Lubrication: Standard lubrication grease Material: Gcr15 for YAR207-2F, cast iron for SY507M Cross Reference: SY 35 TF, SY35TF, YAR207-2F + SY507M and so on
UC207D1 bearing
Close

UC207D1 Bearing UC207 Radial Insert Ball Bearing 35*72*42.9

ID: 35mm OD: 72mm Height: 42.9mm Mass: 0.43kg/pc Lubrication: Pre-lubricated D1: Maintenance free type bearing Cross Reference: UC207D1, UC207 D1, UC207D1LLJ and so on
UCFC207 bearing
Close

UCFC207 Bearing UC207 Pillow Block Bearing Unit FC207 Housing

Inner (d): 35mm Outer (D): 135mm Width (B): 36.4mm Mass: 1.55kg/set Insert Bearing: UC207 Bearing Housing: FC207 Bearing Material: Chrome Steel Housing Material: Cast Iron