M88036-M88010 Bearing M88036/10 Roller Bearing 1″ X 2.6875″ X 0.875″

M88036-M88010 Bearing Specification:

M88036-M88010 Bearing Bore: 1 inch/ 25.40mm
Outer Diameter: 2.6875 inch/ 68.263 mm
Cone Width: 0.875 inch/ 22.225 mm
Mass: 0.970lb/0.44kg
Cup: M88010
Cone: M88036
Enclosure: open
Cage: stamped steel
Rings and Rollers: bearing steel
Certificate: ISO9001: 2015
Category: single row tapered roller bearing
Operating Temperature: –30 °C to +120 °C
Also Known As: M88036 – M88010, M88036/M88010, M88036 / M88010, M 88036/M 88010, M88036/10, M88036/010

Durable Inch Series Tapered Roller Bearings:

FAQ:

Q1: What material is used?
A: Typically hardened chrome bearing steel SAE 52100.

Q2; What operating temperatures are acceptable?
A: Standard chrome steel bearings typically operate up to ~120°C with grease.

Q3: How do I ensure proper installation?
A: Clean mating surfaces, check shaft/housing fits, avoid hammering the bearing, and use correct press or fit techniques to prevent damage.

Q4: How do I inspect for wear or damage?
A: Check for noise, vibration, increased running temperature, pitting, spalling, or uneven roller wear; replace if any of these appear.