387A/382A Bearing 387A-382A Roller Bearings 57.15mm Bore

387A/382A Bearing Specification:

387A/382A Bearing Bore: 57.15mm/ 2.25 in
Outer Diameter: 96.838mm/ 3.8125 in
Bearing Width: 21.946mm/ 0.864 in
Mass: 0.60kg/ 1.323lb
Cone Number: 387A
Cup Number: 382A
Cage: stamped steel
Bearing Material: chrome steel
Limiting Speed(Grease lub.): 2600RPM
Category: single row tapered roller bearing
Also Known As: 387A/382A, 387A / 382A, 387A-382A, 387A – 382A

Available Imperial Taper Roller Bearings:

387A/382A Bearing Maintenance Tips:

Clean Regularly: Wipe off dirt, dust, and debris from the 387A/382A bearing surface to prevent contamination.
Lubricate Properly: Apply the recommended grease or oil at regular intervals to reduce friction and wear.
Inspect Frequently: Check for unusual noise, vibration, or heat during operation to detect early signs of damage.
Avoid Overloading: Operate the 387A/382A bearing within its specified load and speed limits to prevent premature failure.
Handle Carefully: Use proper tools and avoid dropping or striking the bearing during installation or removal.
Protect from Moisture: Keep the 387A-382A bearing dry and shield it from water or corrosive environments to prevent rust.
Monitor Alignment: Ensure shafts and housings remain properly aligned to reduce uneven stress on the bearing.
Replace Damaged Bearings Promptly: Remove any bearing showing signs of wear, pitting, or spalling to avoid affecting other components.