210661-1X Bearing HB88512 Center Support Bearing 60mm Bore

210661-1X Bearing Specification:

210661-1X bearing is essential for ensuring the smooth functioning of driveshafts.
Inner Diameter: 2.3622 in/ 60mm
Outer Diameter: 8.5900 in/ 218.186mm
Width: 1.4170 in/ 35.9918mm
Bolt Hole Center: 8.6250 in/ 219.075mm
Mass: 8.245lbs/ 3.74kg
Seal: rubber Seal on both sides
Also Known As: HB210661-1X, 210661-1X, HB88512AHD, HB-88512-AHD, CB2106611X, N210661-1, HB88512-A, HB88512-AS,  7502106611X, 7502106611XSA, 7502106611XSA2, 2106601X, 2106611X, 5003323, 5003323XB, MM6051
Fits Vehicles : Chevrolet C50, Chevrolet C60, Chevrolet C70, Ford CF6000, Ford CF7000, Ford CF8000, Ford F-600, Ford F-650, Ford F-700, Ford F-750, Ford F-800, Ford FT800, Ford LN7000, Ford LN8000, GMC C5000, GMC C6000, GMC C7000

Bearing Part Number Cross Reference:

Maintenance Tips for Center Support Bearings:

1. Regular Inspection: Check the 2106611X center support bearing for signs of wear, damage, or excessive vibration during routine maintenance.
2. Lubrication: Ensure the HB88512 bearing is properly lubricated according to the manufacturer’s recommendations to prevent premature wear.
3. Monitor Noise: Listen for unusual noises such as grinding, squeaking, or rattling, which may indicate bearing issues.
4. Check Alignment: Make sure the driveshaft and bearing are properly aligned to prevent uneven stress and extend bearing life.
5. Replace When Necessary: Replace the center support bearing promptly if you notice any signs of failure, such as excessive play, noise, or visible damage.
6. Inspect Mounting Hardware: Regularly check and tighten any mounting bolts or hardware to ensure the bearing stays securely in place.
7. Avoid Overloading: Do not exceed the vehicle’s recommended load capacity, as overloading can accelerate bearing wear.