55200/55437 Bearing 55200C-55437 Tapered Roller Bearing

55200/55437 Bearing Information:

55200/55437 bearing is an inch-size tapered roller bearing.
Concerning this bearing model,
Inner Diameter: 50.8mm/ 2 in
Outer Diameter: 111.125mm/ 4.375 in
Total Width: 30.162mm/ 1.1875 in
Mass: 1.34kg/ 2.954lb
Cone: 55220
Cup: 55437
Cage: stamped steel
Bearing Rings & Rollers: bearing steel
Category: single row taper roller bearing
Also Known As: 55200 / 55437, 55200 – 55437,  55200-55437, 55200C/55437, 55200C-55437, 55200C – 55437, 4T-55200C/55437

Inch Tapered Roller Bearings – Model List & Options:

Maintenance Tips for 55200/55437 Bearing:

1. Regular Lubrication – Apply the proper grease or oil at recommended intervals to minimize friction, reduce wear, and extend service life.

2. Keep Bearings Clean – Protect the 55200C/55437 bearing from dust, dirt, and moisture during handling and installation to avoid premature failure.

3. Proper Installation – Use the correct tools and techniques to mount the 55200C – 55437 bearing, avoiding hammering or misalignment that could damage the rollers and raceways.

4. Monitor Operating Conditions – Regularly check for unusual noise, vibration, or heat during operation, as these can signal early signs of wear or damage.

5. Avoid Overloading – Ensure the bearing operates within its specified load and speed limits to prevent excessive stress and shorten service life.

6. Timely Replacement – Replace 55200-55437 bearings that show signs of pitting, rust, or excessive play to prevent equipment breakdown and costly downtime.