RLS 26 Bearing LS 19 1/2 Imperial Deep Groove Ball Bearing 82.55X152.4X26.988

RLS 26 Bearing Information:

RLS 26 bearing is inch series radial deep groove ball bearing.
Regarding this bearing model,
Inner Diameter (mm): 82.55
Outer Diameter (mm): 152.4
Width (mm): 26.988
Inner Diameter (inch): 3.75
Outer Diameter (inch): 6.00
Width (inch): 1.0625
Mass: 1.922kg/ 4.237lb
Number of Row: 1
Sheilds: without
Warranty: 1 year
Cage Material: pressed steel
Rings & Balls Material: chrome steel
Lubrication: standard grease or oil lubrication
Also known as: RLS26, RLS-26, LS 19 1/2, LS 19.1/2, LS19 1/2, LJ 3 1/4, LRJ3.1/4, LJ3-1/4J

RLS Series Bearings Interchange Reference:

Maintenance Tips for RLS26 Bearings:

• Regular Lubrication – Apply the recommended grease or oil at proper intervals. Over- or under-lubrication can reduce bearing life.

• Keep It Clean – Prevent dirt, dust, and moisture from entering the RLS 26 bearing. Use protective covers if necessary.

• Proper Handling – Avoid dropping or applying shocks to the LJ 3 1/4 bearing during installation or maintenance.

• Correct Installation – Use proper tools and techniques to install the bearing; avoid forcing it onto shafts or housings.

• Monitor Temperature – High operating temperatures can indicate lubrication failure or misalignment. Check and address temperature anomalies promptly.

• Check Alignment – Ensure shafts and housings are aligned correctly to avoid uneven load and premature wear.

• Routine Inspections – Periodically check LS 19 1/2 bearings for noise, vibration, or unusual wear. Early detection can prevent failures.