Thrust Ball Bearing Intruction
Thrust Ball Bearing Composition:
Thrust ball bearing is consists of three parts: seat ring, shaft washer and steel ball cage assembly.
The shaft ring matched with the shaft, and the housing ring matched with the housing.
Classifications:
According to the force, thrust ball bearings are divided into one-way thrust ball bearings and two-way thrust ball bearings.
One-way thrust ball bearings can bear one-way axial load.
Two-way thrust ball bearings can bear two-way axial load, in which the shaft ring and the shaft are matched. The mounting surface of the seat ring is a spherical bearing with self-aligning performance, which can reduce the influence of installation errors.
Thrust ball bearings can’t bear radial load, and limit speed is low.
Common Thrust Ball Bearings Size Chart:
| Model Number | Dimensions (mm) | Mass (kg) |
| 51100 | 10×24×9 | 0.0193 |
| 51101 | 12×26×9 | 0.0214 |
| 51102 | 15×28×9 | 0.0243 |
| 51103 | 17×30×9 | 0.0253 |
| 51104 | 20×35×10 | 0.0376 |
| 51105 | 25×42×11 | 0.0562 |
| 51106 | 30×47×11 | 0.0665 |
| 51107 | 35×52×12 | 0.0826 |
| 51108 | 40×60×13 | 0.12 |
| 51109 | 45×65×14 | 0.164 |
| 51110 | 50×70×14 | 0.16 |
| 51111 | 55×78×16 | 0.24 |
| 51112 | 60×85×17 | 0.269 |
| 51113 | 65×90×17 | 0.324 |
| 51114 | 70×95×17 | 0.36 |
| 51115 | 75×100×19 | 0.445 |
| 51116 | 80×105×19 | 0.404 |
| 51117 | 85×110×19 | 0.46 |
| 51118 | 90×120×22 | 0.645 |
| 51120 | 100×135×25 | 0.953 |
| 51200 | 10×26×11 | 0.0293 |
| 51201 | 12×28×11 | 0.0324 |
| 51202 | 15×32×12 | 0.0444 |
| 51203 | 17×35×12 | 0.0506 |
| 51204 | 20×40×14 | 0.0773 |
| 51205 | 25×47×15 | 0.109 |
| 51206 | 30×52×16 | 0.142 |
| 51207 | 35×62×18 | 0.147 |
| 51208 | 40×68×19 | 0.278 |
| 51209 | 45×73×20 | 0.338 |
| 51210 | 50×78×22 | 0.38 |
| 51211 | 55×90×25 | 0.575 |
| 51212 | 60×95×26 | 0.675 |
| 51213 | 65×100×27 | 0.75 |
| 51214 | 70×105×27 | 0.745 |
| 51215 | 75×100×27 | 0.85 |
| 51216 | 80×115×28 | 0.925 |
| 51217 | 85×125×31 | 1.3 |
| 51218 | 90×135×35 | 1.77 |
| 51220 | 100×150×38 | 2.16 |
| 51222 | 110×160×38 | 2.42 |
| 51224 | 120×170×39 | 2.63 |
| 51304 | 20×47×18 | |
| 51305 | 25×52×18 | 0.165 |
| 51306 | 30×60×21 | 0.265 |
| 51307 | 35×68×24 | 0.367 |
| 51308 | 40×78×26 | 0.528 |
| 51309 | 45×85×28 | 0.663 |
| 51310 | 50×95×31 | 0.93 |
| 51311 | 55×105×35 | 1.34 |
| 51312 | 60×110×35 | 1.43 |
| 51313 | 65×115×36 | 1.57 |
| 51314 | 70×125×40 | 2.02 |
| 51315 | 75×135×44 | 2.7 |
| 51316 | 80×140×44 | 2.66 |
| 51317 | 85×150×49 | 3.7 |
| 51318 | 90×155×50 | 4.18 |
| 51320 | 100×170×55 | 4.91 |
| 51405 | 25×60×24 | 0.34 |
| 51406 | 30×70×28 | 0.35 |
| 51407 | 35×80×32 | 0.82 |
| 51408 | 40×90×36 | 1.18 |
| 51409 | 45×100×39 | 1.64 |
| 51410 | 50×110×43 | 1.99 |
| 51411 | 55×120×48 | 2.82 |
| 51412 | 60×130×51 | 3.3 |
| 51413 | 65×140×56 | 4.2 |
| 51414 | 70×150×60 | 5.18 |
| 51415 | 75×160×65 | 6.97 |
| 51416 | 80×170×68 | 8 |
| 51417 | 85×180×72 | 9.5 |
| 51418 | 90×190×77 | 11.2 |
| 51420 | 100×210×85 | 14 |
Applications:
Thrust ball bearings can be used in below applications:
Crane hooks, vertical water pumps, vertical centrifuges, jacks, low-speed reducers, etc.
Contact Us:
If you have any questions about thrust ball bearing introduction, pls feel free to contact us. We will reply you within 12 hours !
