Showing 1–12 of 37 results

205KRR2-SSM6-NR Bearing 205KRR2SSM6NR Hex Bore Ball Bearings

Bore Diameter: 0.8750 in Outside Diameter: 52 mm Overall Width: 27.94 mm Weight: 0.2kg Bore Type: Hex Material: SAE 52100 Steel Seal: Rubber seal on both sides NP: Bearing with snap ring and snap ring groove

ER-12 Bearing ER12 Insert Ball Bearings Replacement 0.75 in Bore

Inner (d) Inch: 0.75 Outer (D) Inch: 1.8504 Width (B) Inch: 1.2188 Weight: 0.22kg/piece C Basic Dynamic Load Rating: 2870 lbf Co Basic Static Load Rating: 1480 lbf Processing Technology: black oxide finish Bearing With: snap ring and set screw lock

ER-24 Bearing ER24 Ball Bearing Insert 1 1/2 in Bore

ID: 1 1/2 in OD: 3.1496 in Overall Width: 1 15/16 in Weight: 1kg Bore: Round Snap Ring: With Closure: Double sealed Locking Device: Single setscrew locking collar

NSK EW208 Bearing EW208 AV2S Insert Ball Bearing GE40-XL-KRR-B

Dimensions: 40*80*56.3mm Mass: 0.72kg/pc Material: Gcr15 Seal: Double sealed Structure: Deep groove ball bearing Cross Reference: EW208, EW208 AV2S, GE40-XL-KRR-B, GE40KRRB, 36208 and so on

NSK UCP211D1 Bearing UCP211 Pillow Block Bearing Unit

Inner (d): 55mm Outer (D): 219mm Width (B): 54mm Mass: 3.7kg.set Insert bearing: UC211 Bearing housing: P211 Material: Chrome steel + cast iron Interchange: UCP211 D1, UCP211 D1X, UCP211 etc.

RAE30NPP Ball Bearing RAE30-NPP Insert Bearings 30X62X35.7

Inner (d): 30mm Outer (D): 62mm Width (B): 35.7mm Weight: 0.3kg/piece Bore: cylindrical bore NPP: lip seals on both sides (P Type:two zinc-plated sheet steel washers)

SA210-31 Bearing 1-15/16″ Insert Bearing SA 210-31

SA210-31 Mass: 0.85kg/pc Dimensions: 49.212*90.000*43.700mm Rolling Element: Balls Seal Type: Double shielded Material: Chrome steel, Gcr15 Cross Reference: SA210-31, SA 210-31, FH210-31, KH210-31, RA115RRB, AEL210-115, YET210-115W etc.

SB205 Bearing SB205D1 Radial Insert Ball Bearing 25x52x27mm

ID: 25mm OD: 52mm Width: 27mm Mass: 0.18kg/pc Material: Gcr15 steel D1: Lubricate free bearing Cross Reference: SB205, SB205D1, SB205 D1,  SB 205, SB-205 and so on

SER204-12 Bearing VER212 Insert Ball Bearings ER12

Inner Diameter: 19.05mm/0.77inch Outer Diameter: 47mm/1.8504inch Width: 31mm/1.2188inch Weight: 0.24kg Snap Ring: With Duty: Normal duty Mounting Method: Set screw Seal: Rubber seal on both sides Lubrication: Standard grease lubrication

SER205 Bearing SER 205 Insert Ball Bearing Set Screw Locking 25*52*34.9

Mass: 0.21kg/pc Bore Diameter: 25mm Outside Diameter: 52mm Inner Ring Width: 34.9mm Material: AISI 52100 Steel Radial Dynamic Load Capacity: 1430 kgf Radial Static Load Capacity: 800 kgf

SER206-19 Ball Bearing SER206 Radial Bearings For Housing

Inner (d) Inch: 1.1875 Outer (D) Inch: 2.4409 Width (B) Inch: 1.5000 Bore Type: round Weight: 0.39kg/piece Material: chrome steel Seal: rubber seal on both sides

SER207-23 Bearing SER 207-23 Radial Ball Bearings For Housing 1.7/16″ Bore

Inner (d): 36.51mm Outer (D): 72.00mm Width (B): 42.86mm Inner (d) Inch: 1.4375 Outer (D) Inch: 2.8346 Width (B) Inch: 1.6875 Weight: 0.61kg/piece