7207 Bearing 7207AC 25 Degree Contact Angle 35*72*17 Ball Bearing

7207 Bearing Data Sheet:

7207 bearing is angular contact ball bearing fond in many applications.
For example, machine spindle, high speed motor, automobile and so on.
For this bearing,
ID: 35mm
OD: 72mm
Width: 17mm
Mass: 0.28kg/pc
Cage: Hard fiber cage
Bearing Material: Chrome steel
Drawing: Refer to AST 7207AC bearing
AC: Contact angle is 25 degree
A: Contact angle is 30 degree
B: Contact angle is 40 degree

7207AC Bearing Photo:

Common Suffixes for Angular Contact Ball Bearings:

CA: General distribution bearings, in the back-to-back or face-to-face configuration. Moreover, axial clearance is smaller than the normal group (CB)
CB: Universally matched bearings, in the back-to-back or face-to-face configuration, and axial clearance is the ordinary group
CC: Commonly matched bearings, in the back-to-back or face-to-face configuration. Moreover, axial clearance is greater than the normal group (CB)
DB: Two bearings paired back to back
DF: Two bearings matched face to face
DT: Two bearings paired in series
E: Optimized internal design
F: Machined steel cage
GA: Universally matched bearings, with light preload in back-to-back or face-to-face configuration
GB: Universally matched bearings, with preload in the back-to-back or face-to-face configuration
GC: Universally matched bearings, with heavy preload in back-to-back or face-to-face configuration
J: Stamping steel cage, steel ball guide
M: Machined brass cage, steel ball guide. Different designs add a number after M, such as M1